index
Black Friday Sale - Get Upto 60% off Store Wide*

Bed Frame Buying Guide: How to Choose the Right Bed Frame in Perth, WA

A bed frame does two jobs. It sets the look of your bedroom, and it supports your mattress every night for the next ten years or more. The second job is the one most product listings skip. This guide covers both, in the order that avoids expensive mistakes: size, support, frame type, storage and the details that only show up once the bed is in your room. Browse our full range of bed frames or test them with a mattress at our Osborne Park showroom.

1. Match the frame to your mattress size

Built to last

Bed frames are sold by mattress size. Standard Australian mattress sizes are:

Size Mattress (approx.) Suits
Single 92 x 188 cm Children, small rooms
King Single 107 x 203 cm Older kids, teens, tall single sleepers
Double 138 x 188 cm Single adults, guest rooms
Queen 153 x 203 cm Couples, most main bedrooms
King 183 x 203 cm Couples who want more room
Super King 203 x 203 cm Large rooms, families who co-sleep

Two things to remember:

  • The frame is bigger than the mattress. A queen frame can be 165 to 180 cm wide and over 215 cm long once you add the headboard and side rails. Use the frame's outer measurements when you plan the room.
  • Keep your mattress and frame in the same system. Some frames are built for a mattress to sit inside the rails, others for it to sit on top. Check the product page so the mattress does not slide or overhang.

For more detail, see Australian Bed Sizes Explained and our guide to king bed frames in Australia.

2. Check the support: slats, centre rail and legs

Built to last

This is where a cheap frame and a good frame differ most, and it matters for your mattress warranty.

  • Slat spacing. Wide gaps let the mattress sag between slats. Most mattress makers ask for gaps of no more than about 7 to 8 cm, and foam and latex mattresses do best with closer slats. Check the slat requirements in your mattress warranty and in our 30-Night Comfort Guarantee terms before you buy.
  • Slat material and shape. Solid timber slats are stiff and quiet. Slightly curved (sprung) slats add a little give.
  • Centre rail and legs. Queen, king and super king frames need a centre rail with at least one support leg to the floor. Without it, the middle of the bed can dip over time.
  • Weight rating. Check the maximum load, especially for heavier sleepers or a heavy pocket spring or latex mattress.

If your mattress feels harder or lumpier than it did in the store, the base may be the cause. Read The Hidden Role of Bed Bases.

3. Choose the frame type

Built to last

Weighing up materials? Read Best Bed Frame Materials: Metal, Wood, or Upholstered?

4. Decide on storage

Built to last

In a smaller Perth home or apartment, the space under the bed is the biggest storage area you have.

Storage type How it works Best forWatch for
Gas lift The whole base lifts on gas struts to reveal a full-size cavity Bulky items: spare quilts, luggage, seasonal clothesThe mattress weight must suit the strut rating
Drawers Built-in drawers at the sides or foot Things you use every dayAbout 50 cm of clear floor where drawers open
Open underbed Space for your own boxes Flexibility, lower costDust; needs tidy containers

5. Check the details listings leave out

Built to last
  • Total bed height. Add the frame's mattress-support height to your mattress thickness. Around 50 to 60 cm to the top of the mattress suits most adults getting in and out. 
  • Headboard height. Check it clears window sills and power points, and that it is tall enough to lean against. 
  • Built-in extras. USB charging and LED lighting are handy, but need a power point within cord reach. 
  • Assembly and access. Measure doorways, stairs and lifts for apartments, and ask whether assembly is included.
  • Noise. Timber-on-metal joints and loose bolts squeak. Re-tighten fittings a few weeks after assembly.

Signs your current frame needs replacing are covered in When Should You Replace Your Bed Frame Instead of Your Mattress?

6. Set a realistic budget

Built to last

At Bedworld, queen frames range from simple metal and upholstered frames under $600 to solid hardwood and gas lift frames around $2,000 or more. Spend where it affects support and daily use: the slats, centre rail and lifting mechanism. Save on extras you will not use. Our Finance Options can spread the cost, and our 3-Day Price Guarantee protects your price.

Bed frame checklist

Built to last
  • Room and doorways measured, using the frame's outer size 
  • Frame matches the mattress size and sits it correctly 
  • Slat gaps meet the mattress warranty requirement 
  • Centre rail and support legs on queen and larger 
  • Gas lift rated for your mattress weight 
  • Total bed height comfortable to get in and out.

Why buy your bed frame from Bedworld

Built to last

How the Right Frame Supports Better Sleep

Built to last

A bed frame is part of your sleep system, and it affects your body more than most people expect.

  • Even support, better alignment. Close, solid slats and a centre rail keep the mattress flat, so your spine is supported the way the mattress was designed to support it.
  • Airflow under the mattress. A slatted base lets air circulate beneath the mattress, which helps moisture escape. That matters in warm Perth summers.
  • The right height for your joints. A bed that is too low makes getting up harder on knees and hips. For many adults, the top of the mattress should sit around knee height.
  • Elevation when you need it. An electric adjustable bed lets you raise your head or legs for reading, snoring or circulation. Read Are Adjustable Beds Good for Back Pain?
  • A quiet night. A solid, well-tightened frame does not creak each time you or your partner moves.

Measuring Up: Frame Size vs Room Size

Built to last

Before choosing a frame, check three numbers against your floor plan:

  • Outer width and length of the frame, including the headboard and any footboard. 
  • Clearance around the bed. Aim for roughly 60 cm on the sides you walk past. 
  • Space for bedside tables. A queen frame in a 3 m wide room leaves little room for wide bedsides. A frame without side overhang can help. 

A low-profile frame also makes a small room feel larger, because you see more floor and wall.

Browse Bed Frames by Mattress Size

Start with the mattress size you have or plan to buy, then filter our bed frames range by that size.

Frame Styles for Every Look

Built to last

For inspiration, read Modern Bed Frame Styles Aussies Love and Top Bed Frame Trends in 2026.

Picking Fabric and Timber Tones

Your frame is the biggest block of colour in the bedroom, so choose its tone first.

Built to last
Built to last
  • Light timbers and oatmeal fabrics make a small room feel bright and airy. 
  • Mid tones like natural messmate and wheat hide everyday marks and suit most wall colours. 
  • Dark timbers, slate and smoke fabrics feel cosy and grounded, and look best with lighter walls and linen. 
  • Keep one family of tones. If the frame is warm timber, choose bedsides in warm timber too. 

More help: How to Match Bedroom Furniture Styles with Your Bed Frame.

Small-Room Frame Tips

Selecting the right bed and mattress dimensions ensures maximum comfort, bedroom flow, and long-term support.

Built to last
  • Skip the footboard to gain length. 
  • Choose drawers at the foot of the bed if the sides are tight, or side drawers if the foot is tight. 
  • A gas lift frame needs space above the bed to lift, but no side clearance, so it suits narrow rooms. 
  • An ensemble base with a wall-mounted headboard takes the least floor space of all.

See Storage Beds vs Regular Beds: Which One Should You Buy?

Signs of a Well-Built Frame
Built to last

When you test a frame in store, check:

  • Weight. A solid frame feels heavy when you lift a corner. 
  • Rails and slats. Thick side rails, a centre rail with legs, and slats that do not bow when you press on them. 
  • Fittings. Metal bolts into metal inserts last longer than screws into board.
  • Upholstery. Fabric pulled tight with neat corners and no loose staples. 
  • Gas struts. A smooth, controlled lift and close, with the strut rating listed. 

Read Top Benefits of Buying a High-Quality Bed Frame, then test our frames at the Osborne Park showroom.

Frequently Asked Questions

Most mattress makers ask for gaps of no more than about 7 to 8 cm. Foam and latex mattresses benefit from closer slats. Always check your mattress warranty terms.

Yes for queen, king and super king frames. A centre rail with a leg to the floor stops the middle of the bed from dipping.

If you are short on storage, yes. It gives you the full area under the mattress. Check the struts suit your mattress weight.

A bed frame has rails and usually a headboard, and the mattress sits on slats. An ensemble base is a low box base the same size as the mattress, often paired with a separate headboard.

Most mattresses suit a well-built slatted frame, as long as the size matches and the slat gaps meet the warranty. Adjustable bases need a compatible mattress.

A good solid timber or well-made upholstered frame should last 10 years or more with tightened fittings and normal care.

WhatsApp Chat